Home | Support | Inquiry | Career | Contact UsDealers                       
Home > Product > Flow Meter
 
ORIFICE TYPE FLOW METERING
   Datasheet | Manual
 
 
• These meters are based on the principal of differential pressure generated by Orifice element.
• Mailly Sutable for Gas And Steam Flow.
• Integral type Orifice flange assemble available for small line size.
• On line density compensation For very accurate results with 0.5 % of FS Accuracy.
• Real time display Process variables(Temperature and Pressure) and calculated results
  (Instantaneous flow, accumulated quantity etc..)
• Mane output modes : 4-20 mA Flow operation , Rs485 Comm. interface, hi and low limits alarm outputs.
• Highly Reliable and Repeatable System, No Moving Parts & Easy for on site Calibration.
• Various type of assessors Avallabe like Needel valve Gate valve Manifolds with or without IBR Approvals.
• Various model of mass flow integrator for diffract gas and steam(Super heated & saturated)
• RS-485/232 communication Available for Data logging & Remote Reading.
• GSM mobile connectivity for wireless remote reading purpose(sms).
 
 
 
 
 
 
 
 
 
 
 
OVAL GEAR TYPE FLOW METER -MARKETED
     

• Fuel Flow Sensor measuring principle is oval gear positive displacement flow meter
• Flow range :(80~1,500L/H) :0.0085 P/L
• Accuracy (standard installation position) : 1%RS
• Fluid Temperature: -40 to80 C
• Maximum working pressure: 10 KG (35~85%RH)
• Power voltage: 3 - 24V DC
• Output signal: NPN Open collector
• Aluminum anodize Material of construction:
• Major fluids : kerosene, Gasoline, diesel, light oil, heavy oil

 
MAGNETIC FLOW METER -MARKETED
     

• Sizes ranging from DN 10 – DN 1000
• Accuracy ±1% of actual flow rate
• Pulse & Isolated 4-20 mA output
• No pressure drops in process.
• Easy maintenance as no moving parts
• Four Numbers of Keys for Parameter Programming
• RS 232 port for Computer/Printer Interfacing.
• Empty Tube Detection and Indication
• Suitable to conductive liquids ≥ 5 µs/cm
• 2 Line Alpha numeric Or LED display.
• Protection : Cast Aluminum lP65 field / wall mounted
• Process Temp: 150 degree max. Lining : PTFE / Rubber / PP

 
WATER FLOW METER(TERBINE) -MARKETED
     

• Water flow sensor mini turbile base : BT-DFS-400
• Flow range : up to 150 litter/minuit
• Standards accuracy : 2.0% fsd
• Working voltage : 4.5 to 24 VDC
• Working pressure : 0 to 12 bar
• Working temp : up to 120 deg c
• Boady Material : PA66+GF30
• Available size : 0.5 “ / 1 “ / 1.5 “
• low electric level : higher than 0.5 VDC

 
Datasheet | Manual