Home | Support | Inquiry | Career | Contact UsDealers                       
Home > Product > Flow Indicator Totalizer > Mass Gas Flow Indicator
 
DATASHEET | UT-1209 | STEAM FLOW TOTALIZER (MASS)
 
   Datasheet | Manual
 
 
   Available size : 96x96 LCD or LED or jumbo display External Box : Ex. Flameproof / M S or Ip65 Box
 
          These units are designed to measure the flow rate of superheated steam & saturated steam in mass or in terms of normalized volume. These flow meters compute compensated steam flow by receiving input from Vertex flow meter, volumetric flow, Orifice plate, ISO 5167 computation, Venturi & Vereabar computations. It computes instantaneous density from pressure & temperature signals as per ASTM norms & computes the mass flow. These instruments can easily interfaced to SCADA or DCS systems with various options like analog signal retransmission and RS-485 MODBUS output. .
 
Feature:-
► Multi Parameter Auto scroll display like Steam press., temp., Nm3 and Sm3
► The instrument can be configured to work on SATURATED or SUPERHEATED or BOTH.
► Non-volatile memory to retain totalized flow, no need of battery to change.
► Gives efficient Pressure and Temp. Compensations for mass flow calculation.
► Calculates Flow rate in NM3/Hr or SM3/Hr as selected.
► Liner or square root input selection with 0.1% Accuracy.
► Isolated 0/4-20mA retransmission output proportional to standard flow rate.
► Field operated user friendly menu for device configurations & calibration.
► 8/10 digit Flow Totaliser with password protected reset.
► Fully password protection for tamper free operation.
► Isolated High speed communicative serial interface facility (RS-232/485).
► 2 nos. 24 Volt loop power supply for Flow & Pressure Transmitter.
► Optional GSM mobile connectivity for wireless Remote access (SMS).
► Flow Meter computer software available.
► Weather proof or flame proof housing.
► Linear or square root option and automatic unit changable.
 
Suitable for orifice and vertex flow meters Flow managements Computer software available.
 
Technical Specification:-
Input Input Type Flow 0 ~ 20 mA dc , 4~20 mA DC , 0-10 V DC
Pressure 4~20 mA DC / 0-10 V DC or Other linear type
Temperature RTD PT 100 3 wire / 4-20 mA
Transmitter power supply 24 V DC @ 30 mA max, isolated from I/p & O/P
Range limits 0.1 to 99999 Programmable with decimal point selection
Accuracy +/- 0.25 % of span
Input impedance >330 K for Voltage & 100 R for current.
Input mode Linear or square root
Indication Indication LCD TYPE : 5 digit Flow rate & 10 digit Totalizer - 16x2 line backlight
Status indication LEDs for Relay status & Communication
Parameter Display Volumetric flow / Mass flow / pressure / temperature / Mass total
Calculation Steam Calculation Saturated steam, Superheated steam, Both – In Auto mode
Output Communication Modbus RTU RS- 485/RS- 232 communication
Analog Current & Voltage outputs 0/4~20 mA, 0~5V, 0~10V, 1~5V DC, fully 3 port isolated
Wireless communication GSM/GPRS base mobile (sms) communication
Communication Communication Protocol & method Modbus RTU RS-485 / RS-232 communication
Programmable parameter & Connectable number Baud rate, Parity, Node address, Stop bit & 0-256 unit
Wireless communication GSM / GPRS base mobile (sms) communication
Programmable
Parameters
Display Parameters Flow rate / steam pressure / temperature
Programming of parameters Through 4 tactile keys
Other (A) Dimensions
(B) Panel cutout
(C) Mounting
(A) 96(H) x 96(W) x 100(D)
(B) 92 x 92
(C) panel mounted
(A) Supply voltage
(B) Power consumption
(A) 110/230 V AC, 50/60 Hz
(B) 4 watt maximum
Operating ambient temperature
and humidity
• 0~50 °C           • Below 90%, non condensing
Flame Proof Gas group I IIA IIB as per IS 2148/1981
Enclose certification Enclosure is certifies by C.M.R.I. Dhanbad
Display glass Clear glass thognet type A as per IS 2206
Degree protection IP 65 as per IS 2147
Material of constructions Aluminum alloy
Cable entry 5 x 3/4 “ ET
External keys 4 nos push button
 
 
Datasheet | Manual