Home | Support | Inquiry | Career | Contact Us                       
Home > Product > Communication
 
COMMUNICATION PRODUCT
 
RS-232 TO 485/422 CONVERTOR
     

UT-501/502 is a 2-way converter for converting RS-232 signals to and from RS-422/RS-485 signals in long-distance application up to 1200m. Converter that can be configured to operate in compliance with RS-485 or RS-422 equipment

• User Selectable RS-422 or RS-485
• User Selectable 2 or 4 Wire RS-485
• Intelligent Control Of RS-485 Transmitter And Receiver
• TD & RD LED's
• Auto boadrate selection
• Fully isolation between input to output
• Full duplex data, TD and RD, between RS-232 and RS-422

 
 
ETHERNET TO 485/422 CONVERTOR
     

UT-504 is a 2-way converter for converting Ethernet signals to and from RS-422/RS-485 signals in long-distance application It supports the connection of up to 10/1000 m

• DIN Rail/Panel Mount
• COM1: RS232/RS485, RJ45 for Ethernet connectivity
• Appli. : Connects IO modules, controllers, HMI with Ethernet Net.
• Function: Transparent data link or Gateway to convert Modbus RTU
      to   Modbus TCP messages
• Support Multiple sockets enables up to 4 Masters to communicate with slaves
     connected to PC-E converter
• Web server for Configuration

 
 
SIGNAL REPEATER
     

UT-501/502 is a 2-way converter for converting RS-232 signals to and from RS-422/RS-485 signals in long-distance application up to 1200m. It supports the connection of up to 32 hubs.

• Modbus ASCII or RTU compatible
• Automatic Send Data Control
• 600 W surge suppression
• Optical isolation for 2000 volts - one minute protection
• Converts 4 wire RS-422 to 2-wire RS-485
• Works with either 2 wire or 4 wire systems
• Data rates to 460 kbps

 
 
USB TO RS-232/ 485 CONVERTOR
     

UT-503 is a 2-way converter for converting. USB signals to and from RS-232/RS-485 signals in long-distance application up to 1200m. It supports the connection of up to 32 hubs.

• Use legacy serial devices with USB PCs and laptops
• Adds a COM port to your USB PC
• USB 1.0, 1.1, and 2.0 compatible (12 Mbps)
• No power supply required (powered from USB bus)
• Db9 female or terminal block
• Baud rates up to 921 Kbps
• Use on RS-485 2-wire or RS-485 4-wire networks
• Supports Send Data Control (SDC)

 
 
Datasheet | Manual